Ford 351 "Clevor" Power Steering Bracket
Note: Requires 351C style water pump with threaded bolt holes as show in photo.
351 "Clevor" Power Steering Bracket for when you put 351 Cleveland heads on a 351 or 302 Windsor engine. This bracket is designed for use with either OEM or CVF Racing pulleys. Mounts pump on the driver's side (USA driver side).
Power Steering Pulleys:
5/8" Keyway Shaft - SBC2PS
3/4" Press Fit Shaft - BBF1PS
Note: Will not work with Factory AC brackets.
Requires Saginaw Power Steering Pump with mounting stud in lower right corner on the back of the pump.
(Photo of Saginaw Pump with Stud)
(Ford vs Saginaw Photo)