Billet Aluminum Ford Small Block V-Belt Pulley Kit (3 Bolt) for CVF Racing Alternator Bracket
1 Groove Crankshaft Pulley, 1 Groove Water Pump Pulley and 1 Groove Alternator Pulley for 289, 302 or 351W.
Ford Passenger cars 1964 - 1969
Ford Trucks 1964 - 1976
Fits vehicles with:
1) Factory 3 bolt damper (Aftermarket dampers may require 0.950" spacer)
2) Water Pump with Passenger side lower radiator hose.
3) Dampener face to water pump flange face 3 7/8"
4) CVF Racing Alternator Bracket or OEM bracket with 1.5" spacer
Note: This kit is specifically designed for use with CVF Racing Alternator Bracket or OEM bracket from a power steering vehicle with 1.5" spacer between alternator and cylinder head. If you have an OEM bracket with 2.5" spacer between alternator and cylinder head you should order SBFE1KIT. This is because there are two mounting locations for the Ford Alternator depending on what accessories you are running. Our brackets are designed for the "Power Steering" location which is closer to the engine than the "Alternator Only" location.