Billet Aluminum Ford Small Block V-Belt Pulley Kit (4 Bolt)
3 Groove Crankshaft Pulley, 2 Groove Water Pump Pulley and 1 Groove Alternator Pulley for 302, 351W, 351C or 351M.
A/C Groove Closest to the Radiator
Application:
Ford Passenger cars 1969 1/2
Ford Trucks 1977+
Fits vehicles with:
1) Factory 4 bolt damper (Aftermarket dampers may require 0.950" spacer)
2) Water Pump with Driver's side lower radiator hose.
3) Dampener face to water pump flange face 3 1/4"
289, 302 & 351W Engines
- 1969 1/2 + Ford passenger cars &
- 1977+ Ford trucks
All Ford 351 Cleveland Engines (351C)
All Ford 351 Modified Engines (351M)
All Ford 400 V8 Engines
Fits the following models with original 289, 302 & 351W small block engines installed.
Note: 1969 model year was a transition year for small blocks and you need to check your water pump and number of bolts on crank pulley.- 1969 ½ - 1985 Ford Mustang
- 1974 - 1978 Ford Mustang II
- 1972 – 1975 Gran
Torino
- 1969-1974 Ford
Galaxie 500
- 1969-1970 Ford
Fairlane
- 1962-1970 Ford Falcon
- 1969-19 Ford Holden
- 1969-1985 Ford Thunderbird
- 1977-1979 Ford Ranchero
- 1977-1985 Ford Bronco
- 1977-1985 Ford F-150
- 1977-1985 Ford F-250
- 1977-1985 Ford F-350
This is not a complete list. If you have a question about application,
please e-mail us. It is not recommended that you select small block pulleys based
on model and year alone because often the original engine has been
swapped. The over-riding factor in selecting the right Ford small block pulleys
should be which side the lower radiator hose is on and number of crank
pulley bolts
