Billet Aluminum Ford Small Block V-Belt Pulley Kit (4 Bolt)
3 Groove Crankshaft Pulley, 2 Groove Water Pump Pulley and 1 Groove Alternator Pulley for 289, 302 & 351W.
Application - Late Model Engines Transplanted into:
Ford Passenger cars 1964-1969
Ford Trucks 1964-1976
Fits vehicles with:
1) Factory 4 bolt damper (Aftermarket dampers may require 0.950" spacer)
2) Water Pump with Passenger side lower radiator hose.
3) Dampener face to water pump flange face 3.0"
Late Model 289, 302 & 351W Engines Transplanted into
- 1964-1969 Ford passenger cars &
- 1964-1977 Ford trucks
Fits the following models with newer (1969 1/2+) 289, 302 or 351W engines installed. If you have an original engine with 3 bolt damper, use SBFE series pulleys instead. Note: 1969 model year was a transition year and you need to check your water pump and number of bolts on crank pulley.
- 1964-1969 Ford Mustang
- 1968-1974 Ford F-100 Pickup
- 1964-1969 Ford Fairlane
- 1962-1969 Ford Falcon
- 1962-1967 Ford Galaxie
- 1962-1969 Ford Holden
- 1968-1969 Ford Torino
- 1964-1969 Ford Thunderbird
- 1964-1977 Ford Ranchero
- 1966-1977 Ford Bronco
- 1975-1977 Ford F-150
This is not a complete list. If you have a question about application, please e-mail us. It is not recommended that you select pulleys based on model and year alone because often the original engine has been swapped. The over-riding factor in selecting the right Ford pulleys should be which side the lower radiator hose is on and number of crank pulley bolts
