Billet Aluminum Ford Small Block V-Belt Pulley Kit (4 Bolt)
1 Groove Crankshaft Pulley, 1 Groove Water Pump Pulley and 1 Groove Alternator Pulley for 289, 302 & 351W.
Application - Late Model Engines Transplanted into:
Ford Passenger cars 1964-1969
Ford Trucks 1964-1976
Fits vehicles with:
1) Factory 4 bolt damper (Aftermarket dampers may require 0.950" spacer)
2) Water Pump with Passenger side lower radiator hose.
3) Dampener face to water pump flange face 3.0"
Note: This kit will work with CVF Racing Alternator Bracket 302-ALTBRKT-P or 351W-ALTBRKT-P. There are two mounting locations
for the Ford Alternator depending on what accessories you are running. If you have an old OEM bracket from an "Alternator Only" car then you will need to adjust the mounting location or purchase a new alternator bracket.
Late Model 289, 302 & 351W Engines Transplanted into
- 1964-1969 Ford passenger cars &
- 1964-1977 Ford trucks
Fits the following models with newer (1969 1/2+) 289, 302 or 351W engines installed. If you have an original engine with 3 bolt damper, use SBFE series pulleys instead. Note: 1969 model year was a transition year and you need to check your water pump and number of bolts on crank pulley.
- 1964-1969 Ford Mustang
- 1968-1974 Ford F-100 Pickup
- 1964-1969 Ford Fairlane
- 1962-1969 Ford Falcon
- 1962-1967 Ford Galaxie
- 1962-1969 Ford Holden
- 1968-1969 Ford Torino
- 1964-1969 Ford Thunderbird
- 1964-1977 Ford Ranchero
- 1966-1977 Ford Bronco
- 1975-1977 Ford F-150
This is not a complete list. If you have a question about application, please e-mail us. It is not recommended that you select pulleys based on model and year alone because often the original engine has been swapped. The over-riding factor in selecting the right Ford pulleys should be which side the lower radiator hose is on and number of crank pulley bolts
