2 Groove Crankshaft Pulley, 2 Groove Water Pump Pulley and 1 Groove Alternator Pulley for 289, 302 & 351W.

Application - Late Model Engines Transplanted into:  

Ford Passenger cars 1964-1969
Ford Trucks 1964-1976

Fits vehicles with:

1) Factory 4 bolt damper (Aftermarket dampers may require 0.950" spacer)
2) Water Pump with Passenger side lower radiator hose.
3) Dampener face to water pump flange face 3.0"

• Water Pump Pulley: SBFS2WP
• Water Pump Pulley Grooves: 2
• Crank Pulley: SBFS2CR
• Crank Pulley Grooves: 2
• Alternator Pulley: SBF1ALT
• Alternator Pulley Grooves: 1

• 1964-1969 Ford passenger cars &
• 1964-1977 Ford trucks

Fits the following models with newer (1969 1/2+) 289, 302 or 351W engines installed.  If you have an original engine with 3 bolt damper, use SBFE series pulleys instead.  Note:  1969 model year was a transition year and you need to check your water pump and number of bolts on crank pulley.

• 1964-1969 Ford Mustang
  
• 1968-1974 Ford F-100 Pickup
  
• 1964-1969 Ford Fairlane
  
• 1962-1969 Ford Falcon 
• 1962-1967 Ford Galaxie
  
• 1962-1969 Ford Holden
  
• 1968-1969 Ford Torino
  
• 1964-1969 Ford Thunderbird
• 1964-1977 Ford Ranchero
  
• 1966-1977 Ford Bronco
  
• 1975-1977 Ford F-150

This is not a complete list.  If you have a question about application, please e-mail us. It is not recommended that you select pulleys based on model and year alone because often the original engine has been swapped. The over-riding factor in selecting the right Ford pulleys should be which side the lower radiator hose is on and number of crank pulley bolts