Billet Aluminum Ford Small Block Water Pump Pulley V-Belt (4 Bolt Damper)

1 Groove Water Pump Pulley for 302, 351W, 351C or 351M.

6.2" Diameter for Increased Horsepower (underdrive)

Shorter Pulley for Alternator Only Applications. Use the taller SBFL1WP for power steering applications

Application: 

Ford Passenger cars 1969 1/2
Ford Trucks 1977+

Fits vehicles with:

1) Factory 4 bolt damper (Aftermarket dampers may require 0.950" spacer)
2) Water Pump with Driver's side lower radiator hose.
3) Dampener face to water pump flange face 3 1/4"

• Diameter: 6.2"
• Overall Length: 2.0"
• Grooves: 1
• Bolt Pattern: 4 Bolt
• Bolt Circle: 1.75"
• Pilot Diameter: 5/8"

289, 302 & 351W Engines

• 1969 1/2 + Ford passenger cars &
• 1977+ Ford trucks

All Ford 351 Cleveland Engines (351C)
All Ford 351 Modified Engines (351M)
All Ford 400 V8 Engines

Fits the following models with original 289, 302 & 351W small block engines installed.  Note:  1969 model year was a transition year for small blocks and you need to check your water pump and number of bolts on crank pulley.

• 1969 ½ - 1985 Ford Mustang
• 1974 - 1978 Ford Mustang II
• 1972 – 1975 Gran Torino
• 1969-1974 Ford Galaxie 500
• 1969-1970 Ford Fairlane
• 1962-1970 Ford Falcon
• 1969-19 Ford Holden
• 1969-1985 Ford Thunderbird
• 1977-1979 Ford Ranchero
• 1977-1985 Ford Bronco
• 1977-1985 Ford F-150
• 1977-1985 Ford F-250
• 1977-1985 Ford F-350

This is not a complete list.  If you have a question about application, please e-mail us. It is not recommended that you select small block pulleys based on model and year alone because often the original engine has been swapped. The over-riding factor in selecting the right Ford small block pulleys should be which side the lower radiator hose is on and number of crank pulley bolts