Billet Aluminum Ford Small Block V-Belt Pulley Kit (4 Bolt)
1 Groove Crankshaft Pulley, 1 Groove Water Pump Pulley and 1 Groove Alternator Pulley for 289, 302 or 351W. Designed for use with CVF Racing Alternator Bracket or OEM Bracket with 1.5" spacer between alternator and cylinder head (as apposed to 2.5" spacer).
Ford Passenger cars 1969 1/2
Ford Trucks 1977+
Fits vehicles with:
1) Factory 4 bolt damper (Aftermarket dampers may require 0.950" spacer)
2) Water Pump with Driver's side lower radiator hose.
3) Dampener face to water pump flange face 3 1/4"
4) CVF Racing Alternator Bracket or OEM Bracket with 1.5" spacer
Kit Contents: SBFL1WP, SBFS1CR & SBF1ALT
Note: This kit is designed to work with CVF Racing Alternator Bracket or the OEM bracket with 1.5" spacer between the alternator and cylinder head. If
you have the OEM bracket with 2.5" spacer you will want to run SBFL1KIT (or SBFL1WP-A & SBFL1CR if ordering seperately). This is because there are two mounting locations
for the Ford Alternator depending on what accessories you are running.
Our brackets are designed for the "Power Steering" location which is closer to the engine than the "Alternator Only" location.